Bison V1 V2 V3 V4 Versadjust Pedestals
*NOTE: Tabs are sold separately here.
*This is a special order product- subject to return restrictions. Shipping and return policy
Bison V1 V2 V3 V4 Versadjust Pedestals
Bison V1 V2 V3 V4 Versadjust adjustable pedestals with a height range of 2.25"-9.75" and either a 1/8" or a 3/16" Tab. The Versadjust, adjustable V-Series line reaches heights from 2 ¼ inches to 36 inches, has a 1250-pound weight bearing capacity and contains built-in slope compensation from 0 – one-half inch per foot slope. Precise spacer tabs allow for deck drainage, and the screw-to-adjust height setting assures a perfectly straight and level deck. Quick Clip Coupler increases the speed and efficiency of installing pedestals at heights over 9 inches. Accessories are available to compensate for additional slope and accommodate heights from 1/8 inch to 2 ¼ inches. Use Versadjust Pedestals with Bison Brace System for Excess Height Installations from 24”-36” in height or for installations requiring additional stability.
| Height Range |
2-1/4" to 2-3/4" (57 to 70 mm) |
|---|---|
| Base Diameter |
8-3/8” (213 mm) |
| Weight |
1.5 lbs (0.68 kg) |
| Weight Bearing Capacity |
Maximum 1250 lbs (567 kg) FoS:3 per Pedestal |
*Note: Bison recommends 3/16″ tabs when using Bison Wood Tiles.
Bison V1 V2 V3 V4 Versadjust Pedestals
Bison pedestal deck supports are manufactured in the USA with 20% post-industrial recycled materials. Bison Versadjust pedestals create level rooftop decks over sloped surfaces. Bison pedestals elevate and support Wood Tiles, Concrete Pavers, Site Furnishings, and a variety of other surfaces when sophisticated, commercial-grade decking is required. The Bison Versadjust (V-Series) Adjustable Pedestal line has a broad footprint that provides stability, is impervious to freeze-thaw cycles, and offers a range of heights suited to a wide variety of applications. Precise spacer tabs allow for deck drainage and uniform paver spacing, while the screw-to-adjust height settings assure a perfectly level deck.
Warranty:
The warranty will be honored only through the manufacturer, Bison. For your convenience, product warranty information is attached below; please click the link below to view the current warranty policy on the manufacturer's site. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly.
Contact Link= https://bisonip.com/company/contact-bison/
855-887-7090
See "related products" for more options.
| Stock Info | Special Order |
|---|---|
| In Stock Message | In Stock |
| Enable Dropship | No |
