ET&F Panelfast Model 510 Coil Nailer 90-120PSI
ET&F Panelfast Model 510 Coil Nailer 90-120PSI
This sequential fire pneumatic Panelfast Model 510 puts the pin precisely where it belongs with its adjustable depth control covering plywood, gypsum sheathing, fiber cement siding, and vinyl. Complete the Panelfast system with specially designed Panelfast pins of both 1-1/2" and 2" lengths. The exclusive design of the tool drives the largest 5/16" headed pin on the market.
The Model 510 Tool and Panelfast AGS-100 pins comprise the Panelfast system.
See "Related Products" below for more options.
ET&F Panelfast Model 510 Coil Nailer 90-120PSI
For Wood, Gypsum, and Cement Panels to Steel Fastening System
One tool does it all! The exclusive design of the Model 510 tool drives the largest 0.100 headed pin on the market, providing maximum wind pressure resistance even in gypsum based sheathing materials. The tool accepts pins 1 1/2", 2" and 2 1/2" in length and is designed for use with steel 27 mil (22 GA.) to 68 mil (14 GA.) thickness.
TOOL CHARACTERISTICS
Collation Angle | 21° |
---|---|
Fastener Type | 21° Coil., Panelfast® AGS-100 Pins |
Magazine Capacity | 250 pins |
Fastener Length |
1 1/2 - 2 1/2"
38 - 65 mm
|
Height |
10 1/2"
267 mm
|
Width |
4 1/2"
114 mm
|
Length |
11"
279 mm
|
Weight |
5.5 lbs
2.5 kg
|
Pressure |
90 - 120 psi
6 - 8 bar
|
SCF per Cycle | 0.052 SCF performance at 100 psi (6.9 bar) / 1,47L performance at 7 bar |
Lubricant | Non-detergent pneumatic tool lubricant |
Actuation System | sequential fire |
Loading | coil |
Stock Info | Out of Stock |
---|---|
In Stock Message | In Stock |
Enable Dropship | No |