Guidance:

• Install fasteners with 0-2500 rpm screw gun equipped with depth sensing noise piece.
• Fastener length should provide for a minimum of 3/16” penetration of fully developed threads into metal substrate.
• Use of impact guns or hammer drills is not recommended.

Specifications:

• Color=  Medium Bronze
• Fastener Length=  1.5"
• Application= Metal panel to metal
• VistaCoat premium coating system
• Head Style= Cupped Hex Washer head
• Drive Socket= 5/16" Hex
• Load Bearing Length (mm)= 6, 9, 15, 22
• Load Bearing Length (in)= 0.2257", 0.3487", 0.5987", 0.8487"
• Product Type= Metal Self-Drill Screw
• Diameter= #12
• Diameter (mm)= 5.38mm
• Drill Capacity Max (Inches)= 0.210"
• Drill Point= SD3
• Drill Capacity Range (mm)= 0.889 mm–5.334 mm
• Material= Carbon Steel
• Thread Major Dia= 5.38 mm  (0.212”)
• Thread Minor Dia= 4.06 mm (0.160”)
• Threads Per Inch= 14
• Washer Type= Cut washer EPDM
• Equipped with special long pilot lengths to accommodate nested purlins
• Included is an integral capped hex washer head with an EPDM sealing washer

Warranty Type:   VistaCoat limited warranty 

The warranty will be honored only through the manufacturer, SFS Group. For your convenience, product warranty information is attached below; please click the link below to view the current warranty policy on the manufacturer's site. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly.

Link  -  SFS Warranty Information 

Email  -  [email protected]