Snap-Z 1000 Ridge Vent for Standing Seam Roofs
Snap-Z 1000 Ridge Vent for Standing Seam Roofs
Snap-Z’s 1000 is a ridge vent made for metal roofs with a 1” standing seam rib. This perforated vent is designed with a foam closure. The vent is pre-punched for easy screw placement and is equipped with pre-applied butyl tape so all you’ll need to do is peel off the backer when you are ready to install. Available in black to blend in with ridge cap shadow lines.
Quantity: 1
Snap-Z 1000 Ridge Vent for Standing Seam Roofs
- Made to fit= 1" standing seam ribs
- Length= 12”
- Color= Black
- Perforated
- Foam Closure
- Pre-applied Butyl tape
- Model= Snap-Z 1,000
- Florida Building Product Approval # FL39250
- 0.032 Aluminum
- 26 Gauge Steel
- Snow Infiltration - 0
- Withstands 110 MPH wind driven rain
- Withstands 110 MPH winds
- Net free area up to 12 sq. in. per linear foot of ridge
- Air-flow: 730 cu. ft. per min. (per 10' ridge)
Compatible Panel Types (include the following and more) :
- 1” Snaplock
- 1” Mechanical Panel
- 1” Nail Flange Panel
Warranty:
The warranty will be honored only through the manufacturer, McElroy Metals. For your convenience, product warranty information is attached below; please click the link to view the current warranty policy on the manufacturer's site. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly.
- Link: Snap-Z Contact Information
| Stock Info | Out of Stock |
|---|---|
| In Stock Message | In Stock |
| Enable Dropship | No |
| Color | Black |