Super Anchor 2401 Retro-Flash D and RS System 1pc
*This is a special order product- subject to return restrictions. Shipping and return policy
Super Anchor 2401 Retro-Flash D and RS System 1pc
Most roof anchor installations require the removal of shingles to install. This can pose a problem, especially on older roofs with brittle shingles. No need to remove the ridge cap to install fall arrest anchors because this flashing allows you to install anchors directly over your existing roofing material.
The D- Minus anchor can be mounted directly over existing asphalt shingle roofs without removing any shingles. To cover the anchor and fasteners and protect it from the elements we invented the RetroFlash. It is a special metal flashing made from 20-gauge metal that slips under the course of roofing just above the anchor. It is held in place by the roofing material and the caulking used during installation. This product can be painted to match the color of the roofing material.
Dimensions:
Length: 14.0" (355mm)
Width: 4" (100mm)
Wt. 9.7oz (276g)
Gauge avg. 0.35-0.40
See "Related Products" for options other than this order's specific amount/type, or use "Search" for a wider range of possibilities.
Super Anchor 2401 Retro-Flash D and RS System 1pc
- D - into Top-Chord/Truss: Simply center the anchor over the truss and nail or screw the anchor down securely.
- D - through Roof Decking into Backer-Board: Install our ¾€ backer board under the current roof sheeting. Screw the D- Anchor through the roofing/decking and into the backer board
Retro-Flash System single package.
| Stock Info | Special Order |
|---|---|
| In Stock Message | In Stock |
| Enable Dropship | No |
| Package Amount | 1ct |
