• Size= 300ml cartridge
• Color= Gray
• Tremco TREMGrip's hybrid formula, with non-sag and elastic properties, is suitable for use in a variety of applications when applied on several different substrates. 
• Drainage board for backfill 
• Air barriers 
• Insulation to air barrier applications 
• Below grade membranes
• Medium modulus adhesive
• High initial grab
• Excellent strength once cured 
• Resistant to UV, weather, and aging TREMGrip utilizes a user and environmentally friendly formulation. 
• Solvent free 
• Low odor 
• Extremely low VOC 
• Suitable for indoor and outdoor use

Please note:

• Not Suitable for bonding polyethylene, polypropylene, Teflon® or nylon
• Do not use as a structural glazing adhesive. Not suitable for bonding of plastics that are sensitive to stress cracking.
• Not recommended for prolonged exposure to water.
• Contact with bituminous or tar containing surfaces may lead to discoloration.
• Staining on natural stone may occur.
• If 2 non- porous substrates are adhered, the maximum width should not exceed 15 mm.

Warning: This product contains chemical(s) known to the State of California to cause cancer and/or to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov

Warranty:

The warranty will be honored only through the manufacturer, Trmeco. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly.

Call: 800-321-7906