ET&F AKN1000150HA Sheet Plastic Collated Pins 1.5" 2000ct
$160.90
Special Order
SKU
NCAKN1000150HA
*This is a special order product- subject to return restrictions. Shipping and return policy
ET&F AKN1000150HA Sheet Plastic Collated Pins 1.5" 2000ct
ET&F's STEEL FRAMING PINS AKN-100-XXXXHA series pins are designed especially for the ROCKFAST E45 tool to attach plywood, oriented strand board (OSB), and fiber cement siding and soffit to cold-formed steel from 97 mil (12 GA.) to 27 mil (22 GA.). These pins are finished with Aericote 1000 coating which provides ten times the corrosion protection of electroplated zinc. When driven, the fastener separates completely from the sheet plastic collation leaving a clean fastening, especially important when face nailing siding.
See "Related Products" below for more options.
ET&F AKN1000150HA Sheet Plastic Collated Pins 1.5" 2000ct
PIN CHARACTERISTICS
Collation Type | plastic sheet coil |
---|---|
Head Diameter | 0.300" (7.6 mm) |
Nail Diameter |
.100"
2.54 mm
|
Length |
1 1/2", 2", 2-1/2"
Ā
|
Finish | AericoteĀ® 1000 |
Material | high carbon steel, heat treated |
Nail Head | Full Round Head |
Shank Types | knurled |
Coil Capacity | 250 pins |
Tools | E45 |
Standard / Codes | ESR-1844, ESR-2273, ESR-2290, IAPMO ER-335 |
PACKING INFORMATION
Quantity per Case | 2,000 (AKN-100-0250HA 2,000) |
---|
Stock Info | Special Order |
---|---|
In Stock Message | In Stock |
Enable Dropship | No |
Write Your Own Review