Touch-Up Pens Application Instructions:

PREPARATION: The areas to be touched up must be dry and free from dust, dirt, and grease. Before each use, shake the Pen for approximately 30 seconds. The rattle of mixing balls must clearly be heard.

DE-AERATION: Due to exterior influences (heat) an overpressure may develop. To prevent blotching, the pen must be de-aerated. Put the pen with the tip pointing downwards onto a solid, non-soaking surface, press down, and hold for 2 seconds, release, and repeat the procedure until the tip is filled with touch-up (7-10 times may be necessary).

APPLICATION: Touch down the pen tip at a flat angle (about 45 degrees) using light pressure. The valve opens and the touch-up flows continuously. With the newly designed tip, you can work precisely on hard-to-reach areas. Different stroke widths can be easily applied. Touch up rapidly with one stroke using light pressure. Important: Do not apply another coat of touch-up until the first coat has dried (approximately 3-5 minutes). If opacity decreases, shake the pen again and de-aerate as described above. If touch-up flow decreases, simply pump again. Put the cap on immediately after use. The cap has to snap with a click.  

Available in the charismatic color of Atlantic White. 

*Warranty:

The warranty will be honored only through the manufacturer, Chamclad. For your convenience, product warranty information is attached below; please click the link below to view the current warranty policy on the manufacturer's site. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly.

ChamClad Website:    https://chamclad.com/products/
Email: [email protected]

780-454-4430

For other options, see "Related Products" below.