Call Us Today!
Email
Gaco FlashFoam Spray Foam Insulation and Roof Foam Spray Kit
Gaco FlashFoam Spray Foam Insulation and Roof Foam Spray Kit
Gaco FlashFoam is a portable, high-density 3 lb. closed-cell polyurethane foam insulation designed for use alongside Gaco Spray Polyurethane Foam (SPF) roofing systems. GacoFlashFoam is great for flashing curbs, parapets, walls, and penetrations, in addition to repair applications before the application of a Gaco Flex coating. GacoFlashFoam bonds to any shape and substrate, eliminating common sources of leaks experienced with other flashings. Spray-Applied 3 lb. Polyurethane Foam Flashing comes in a disposable and complete kit form with all hoses, tanks, and replacement nozzles included.
The GacoFlashFoam kit consists of:
* Two chemical components shipped in pre-pressurized canisters (A: isocyanate and B: polyol blend)
* A dispensing gun and 10′ hose
* Ten multi-purpose mixing nozzles
* Nitrile gloves
* A packet of petroleum jelly
* Instructions for proper setup, operation, storage, and reuse of the kit
This portable system yields 120 BF per set and is available in both HFC and HFO versions for restricted states.
For other options, see "Related Products" below.
Gaco FlashFoam Spray Foam Insulation and Roof Foam Spray Kit
BENEFITS:
It’s easy to transport and use and versatile in application.
PORTABLE AND CONVENIENT. The convenient 41 lb. self-contained kit does not need power and is light and portable. Carry it in one hand and spray with the other.
EASY TO INSTALL. GacoFlashFoam provides an economical, efficient, and superior alternative to full-size SPF rigs.
ADHERES TO A VARIETY OF SUBSTRATES. GacoFlashFoam bonds to any shape or substrate to eliminate common sources of leaks often experienced with other flashings. It may also be used to repair existing spray foam roofing systems.
INCREASED COVERAGE. GacoFlashFoam covers 120 board feet at 1ʺ and has an R-value of 6.5 at 1ʺ. Tack-free time is 30-40 seconds.
WORKABILITY. GacoFlashFoam was designed to be part of a complete system of integrated GacoFlex products, making it the first spray foam ideal for use with all GacoFlex coatings.
• For best results, use with substrate temperatures between 65°F to 90°F (18°C to 32°C). Surface temperature will affect the expansion, cure time, and possibly also the adhesion of the foam. Cooler temperatures will result in less expansion and slower cure times. Temperatures below 50°F
(10°C) may result in adhesion problems due to condensation.
| Stock Info | Out of Stock |
|---|---|
| In Stock Message | In Stock |
| Enable Dropship | No |
