• Periodically, it may be necessary to fix small damaged areas of stone coated panels or accessories. To repair these areas, this touch up kit will provide everything necessary to make the needed repairs.
• The surface of the repair should be clean and dry prior to any repair being attempted. To ensure adequate drying of the repair, the ambient temperature should be at least 50º F and Relative Humidity below 85%. The acrylic basecoat is applied with care to only the damaged area of the panel being repaired. The wet basecoat coating is then completely covered with stone chip and any excess chip is to be blown off.
• If any panels do not have over glaze, or they have larger areas requiring glaze they can be easily field coated by using standard Clear Acrylic Aerosol spray available from most hardware stores. This process can be performed with the panels already fastened in-place on the roof. Appropriate masking should be done to avoid applying additional clear coating to already glazed materials. For all touch-up repairs use only the Boral ‘Touch-Up’ kit. Do not use colored spray paint as this will fade and leaves an unsightly marked area on the roof.

Warranty: Exclusive 50-year, Fully transferable 

The warranty will be honored only through the manufacturer, Unified Steel™. For your convenience, product warranty information is attached below; please click the link to view the current warranty policy on the manufacturer's site. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly.

Warranty information will be provided through Westlake Royal Roofing

Link  -  WestlakeRoyalRoofing.com 

Link  -  Warranty page 

800.658.8004