Specifications: 

• Length= 67 ft
• Width= 36 in
• Nominal Thickness= 53 mil (1.35mm)
• Minimum Thickness= 47 mils (1.20mm)
• Coverage= 2sq or 200sq.ft
• Minimum Installation Temperature= 40F  (4C)
• Topside= Sanded - improving bonding strength between system layers
• Underside= Slit-back Release Film for easy application
• Self-sealing membrane around nails or fasteners
• Installation Method= Self-Adhered  - which eliminates the need for open flames, hot asphalt or solvent-based adhesives
• Reinforcement= Glass Fiber
• SBS rubber polymer adds elongation and flexibility to the sheet
• Approved for use on= plywood, OSB board, wood plank, concrete or masonry. Versatile product for steep or flat roof applications.
• Meets ASTM D1970 standard

Installation: When installing please allow the membrane to relax prior to installation. Place the membrane in the desired position. Remove the protective release film from the underside of the sheet. Roll the membrane into place with a hand roller to ensure proper adhesion. Side laps must be a minimum of 3 inches (76 mm) and end laps a minimum of 6 inches (152 mm).

Warranty: 

The warranty will be honored only through the manufacturer, Soprema. For your convenience, product warranty information is attached below; please click the link to view the current warranty policy on the manufacturer's site. If you need further assistance regarding your coverage or have other inquiries, please contact the manufacturer directly.

     - Link: Soprema Warranty Information